Operational Safety of Asphalt Mixing Plant
(1) Operations, enhance the thermal material hopper, mixer and a variety of known materials may not have kept the bucket;
(2) Wet Cleaning System with mixing equipment pumps its dust removal system should be intact, and to ensure stable and uninterrupted water quantity;
(3) Discharge hopper pit in the ground, water flooded the pit should prevent electrical components;
(4) Mixing machine to start, stop, must be carried out according to established procedures. Ignition failure, the burner should be promptly closed throttle, to be fully ventilated before making ignition. When you need to adjust the ignition, high voltage power supply must be cut off;
(5) Continuous mixing equipment should be stopped immediately jet flame asphalt. When mixing the drying cylinder fire, you should immediately turn off the burner and blower fan, stop the supply of asphalt, then the high water content of fine aggregate degenerate into dry mix and discharge port for external use dry powder or foam fire extinguishing;
(6) Should be cleared after the shutdown of the belt, each hopper for residual sediment and dust removal device inside and outside, and clean bitumen pipeline.
According to the above questions are finishing the practical work experience participants made reference, any questions, please timely communication, correct me.
