How to Debug Concrete Batching Plant Correctly
Debugging concrete batching plant is the most important work after the installation of the concrete batching plant. Debugging work is not a simple casually operation a few times. The correct debugging work needs to follow the steps one by one, if successfully completed, concrete batching plant will be able to officially run!
First emergency button is reset when debug the control system. Turn off the electrical cabinet power switch. And then turn on each branch circuit breaker, control circuit power switch, control room power switch, observe the electrical system there is no abnormal phenomenon. If have abnormal phenomenon, please immediately check; Open the motor button, try to run the motor steering is correct, if not correct should immediately adjust; Start the concrete batching plant air pump, until the air pressure to meet the requirements after the button in accordance with the button to start the gas control gate, check the action is flexible.Check the air compressor switch is normal, the barometer display is correct, the safety valve pressure to adjust the standard range; Running concrete mixer to test if there is abnormal sound, the various parts are normal Work in the commissioning of the belt machine need to be carried out in the course of operation to check the operation of each roller is flexible, to carefully observe the belt, can not have swing, deviation, grinding, skidding, deformation, etc.; In the debugging of concrete ingredients Machine must click on the ingredients button to see if it is flexible and can configure the accuracy, and then in the debugging ingredients reference.
If you have finished the above-mentioned concrete batching plant are normal operation, then you can run the concrete batching plant.
